Furthermore, installing the wrong HP drivers can make these problems even worse. Don’t worry if you don’t know what’s your operating system. If your product does not have a duplexer, reattach the rear access door to the rear of the product. Solution No action is necessary, as the product is ready to process a print job. The information you provided will definitely help others who are seeking help online. Disconnect the power cable from the printer while the printer is still ON. Click Start , and then click Control Panel.

Uploader: Shaktisida
Date Added: 15 December 2006
File Size: 45.88 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 81480
Price: Free* [*Free Regsitration Required]

Open the cover on the product.

Check the power adapter to make sure that the power hp9322c is securely plugged into it. Gently push the carriage to the left and then to the right.

Wait until the carriage is idle and silent before continuing. To see if your product is still under warranty, go to the warranty check website http: Touching these parts can result in up932c, ink failure, and bad electrical connections.

Clean the paper rollers Use one of the following methods to clean the paper rollers. HP printer networked to my new windows 7 laptop?? Please try again shortly.

HP Deskjet c Printer drivers – Download

The Power light, the Resume light and the Cartridge lights blink alternately The following light pattern displays on the product control panel:. Remove the rear access door to clean the rollers Press the Power button to turn off the cp. Reinsert the cartridges Follow these steps to reinsert cartridges.


Print a self-test report Print a self-test report to make sure that the hardware functions correctly. If you have completed all the steps listed above and are still experiencing a problem, continue to the Service the printer section at the end of this document. Clear the paper jam from x rear of the printer Your product will have either a rear access door or a two-sided printing accessory duplexer.

Solvusoft: Microsoft Gold Certified Company

Do not touch the copper-colored electrical contacts or the ink nozzles. The new calibration page indicated an improved yellow but the black – which should have been good after the cartridge change today was not much better than the prior printout.

Wait for the print job to finish If the product is currently processing a print job, wait for the print job to finish. Message 4 of 4. If the issue persistscontinue with the next solution.

Reattach the duplexer Press the buttons on each side of the duplexer to release it. The following sections describe the most common messages that might display on the computer in combination with a blinking Resume light. According to HP there are no drivers or software available for Vista or Windows 7 for that printer. The information you provided will definitely help others who are seeking help online.


Remove the new cartridge from its package, and then carefully remove the protective tape. How do Np932c resolve this issue? It came pretty close – but not quite correct for my problem of forcing the cleaning of the printheads.

Remove and then reinstall the cartridges Improper placement or installation of the cartridges can cause a carriage jam. Clear the paper jam from the front of the printer Make sure that the power hp932 is disconnected from the rear of the product.

Hopefully the above information will help anyone else that might be trying to use an older piece of hardware. Please try again now or at a later time.

Removing Ink Stains from Hands and Fabric https: Follow these steps to clean the paper feed rollers. Hp932d find what you were looking for?

Cleaning and Maintaining the Series Printer https: It seemed to be working OK before the last cartridge ran dry.